|
|
|
|
|
JS110 Jack Spit Motor Assembly
This Patent Pending design alows simple geared motor connection to a pair of commonly available garage Jack Stands (also known as Axle Stands) to create a very useable Rotisserie. Height adjustment of the meat above the heat source, such as hot coals, is done through the adjustable Jack Stands. A vice like bracket holds the motor to the Jack Stand offering temporary and unmodified connection to the stand.
Specifications:
Size, 127 x 136 x 77mm
Weight, 3.0kg
AS/NZS approved power cord
Input power 220-240VAC, 50Hz, 45W
Rotation speed 3.3RPM CCW
Torque 220Kgf.cm
Noise < 65dB
304 Stainless motor cover
|
|
|
|
|
JS001 Spit Bar Assembly This assembly consists of a 1.5m long, square section spit bar, with two forked meat skewers and two leg stirrups.
Forks and stirrups slide freely along the spit, then lock into place preventing unwanted meat rotation or axial movement.
All components are manufactured from 304 Stainless Steel giving enduring quality and easy cleaning.
|
|
|
|
| JS100 Motor Assembly
Design your own rotisserie incorporating this motor assembly.
Geared motor, cover and power cord only, as used in the Jack Spit Motor Assembly.
High torque, shaded pole geared motor with thermal protection. Metal gears provide reliable operation under heavy loads.
|
|
|
|
|
JS010 Motor Shaft Adaptor
Manufactured from solid 304 Stainless Steel this adaptor couples the motor to the spit. Through its Patent Pending design it will bear the weight of a fully loaded rotating spit on top of a commonly available garage Jack Stand. A simple R-Clip retains the spit bar and allows for quick disconnection and reconnection through-out the cooking process. At the motor end of this adaptor is a locking keyway that will allow adjustment along the motor shaft when different size Jack Stands are used.
|
|
|
|
|
JS002 Jack Stands
Chromed Steel, 3 Ton, Jack Stand Pair
Weight, 5.0kg
These stands will allow spit height adjustment from 280 - 420mm.
|
|
|
|
